OPERATING INSTRUCTIONS
TCC1400i
1 IMPORTANT SAFEGUARDS
When using electrical machines, basic precautions should always be followed to reduce the risk of
electric shock and injury to people, including the following:
1.
Read all instructions.
2.
Always unplug the machine when not in use or before cleaning.
3.
Do not use outdoors.
4.
Extreme caution should be taken when the machine is used by or near children or disabled persons.
5.
To protect against risk of electrical hazards, do not immerse cord, plugs, or the whole machine in
water or other liquids.
6.
Do not operate the machine with a damaged cord or plug, or after the machine malfunctions, has
been dropped or is damaged in any manner. Return the machine to the nearest authorized service
facility for examination, repair, or adjustment.
7.
Do not use accessory attachments not recommended or sold by the machine’s manufacturer.
8.
Do not let the cord touch hot surfaces or hang over the edge of the work table.
9.
Do not use the machine for other than its intended use. This machine is intended for Office or
Household use only.
10.
The socket outlet shall be near the machine and shall be easily accessible.
11.
Keep fingers and body parts away from all moving parts.
2 LOCATION
Please remove the laminator carefully from its packaging and place it on a flat work surface. Place the
machine in an area where it will normally be used, ensuring adequate room for the finished laminate
to flow or slide out at the back.
