AIR-IQ2 AIRFLOW MEASUREMENT SOLUTION
T.A. Morrison & Co. Inc. | P.O. Box 157 Smiths Falls Stn Main, Ontario, Canada K7A 4T1 | 800 561 3449 | Fax: 800 668 8476 | tamcodampers.com
EBTRON, Inc. | 1663 Hwy. 701 S., Loris, SC USA 29569 | 800.2EBTRON (232.8766) | Fax: 843.756.1838 | www.ebtron.com
AIR-IQ2 INS
TALL GUIDE_2022_04
IMPORTANT! - READ THIS FIRST!
INTRODUCTION
The TAMCO/EBTRON AIR-IQ2 Airflow Measurement Damper Solution consists of a high-quality TAMCO damper
and factory-installed, precision EBTRON Airflow Measurement Station (transmitter and flow measurement
probes) designed for negative pressure OA (outside air) and unducted return air applications. Operation of
the AIR-IQ2 in other applications may not be recommended. Please consult your TAMCO/EBTRON applications
specialist for specific applications.
Observe the following precautions during installation to prevent damage and to ensure proper operation of the
AIR-IQ2 product. Read and understand all of the information contained in this document and in the INSTALLATION
GUIDELINES document, prior to installation of the AIR-IQ2. Failure to observe the following precautions can result in
damage to the TAMCO Damper and/or EBTRON equipment that is not covered under warranty.
FOR ADDITIONAL AIR-IQ2 ASSISTANCE
TAMCO DAMPER ASSEMBLY:
For assistance with specific TAMCO AIR-IQ2 Damper questions or issues not covered in this document, contact
TAMCO Customer Service at 1-800-561-3449.
EBTRON AIRFLOW MEASUREMENT STATION:
Refer to the EBTRON A4/EF2 O&M Manual under separate cover for airflow measurement station wiring,
instrument setup and operation. For additional assistance with EBTRON Airflow Measurement Station
questions or issues not covered in the O&M Manual, contact your local EBTRON Representative or EBTRON
Customer Service at 1-800-232-8766.
CAUTION!
The AIR-IQ2 Damper is supplied with factory-installed EBTRON airflow measurement probes with
the transmitter shipped loose for field installation. Exercise caution when unpacking, handling
and installing the AIR-IQ2 to prevent damage to the EBTRON instruments and the TAMCO damper
assembly.
If damper frame damage is noted, contact TAMCO Customer Service for further instructions.
DO NOT HAMMER ANY PART OF THE FRAME, AS DAMAGE TO THE AIRFLOW MEASUREMENT
STATION COMPONENTS THAT MAY RESULT IS NOT COVERED UNDER WARRANTY.
Do not adjust damper linkage mechanism. Tampering with linkage will void damper warranty.
If damper problems remain after completing the PRE-INSTALLATION VERIFICATION (in the
INSTALLATION GUIDELINES document), please call TAMCO Customer Service.
Damper linkage, airflow sensor probes and transmitter must remain accessible after
installation to permit setup and recommended periodic maintenance activities.
Refer to the EBTRON A4/EF O&M Manual, provided under separate cover for airflow measurement
station wiring, instrument setup and operation.
⚠
⚠
⚠
⚠
⚠
⚠
⚠
⚠
⚠
⚠
3
