Radio Operations
Press the
button to select the radio mode.
one of the three
You can store up to a total of 18 radio stations in the memory (18 FM), manually or automatically.
- Select a band (if needed)
- Select a station by
or
buttons, refer to auto / manual tuning.
- Hold a Preset button ( - ) for at least 2 seconds.
- Select a band (if needed).
- Press a preset button ( - ) briefly to recall the stored station. In case of RDS mode, the strongest AF is selected after AF
searching.
Press the
button to scan each preset station. If the field strength level is more than the threshold level, the radio will
hold at this preset station for 5 seconds with sound output, then go to next station until all 6 FM stations are scanned, finally
the radio will play at the preset station where scanning started. The preset station number on the LCD will flash during the
process. Press the
again to stop preset scan.
MODE
- To store a station:
1 6
- To recall a station:
1 6
- Preset scan:
AMS
AMS
To store / recall a preset radio stations
Auto store / Preset scan
To select a radio band
BAND
- Automatic search mode:
- Manual search mode:
In radio mode, Press the
button repeatedly to select
radio broadcasting bands:
->FM 1-> FM 2 -> FM 3 ->.
Auto/ Manual tuning (in 50KHz steps)
Press the
or
button briefly to launch the automatic search forwards or backwards. The message “SEARCH” appears on
the LCD display. The radio will search up or down for a strong signal radio station within the current band.
Press and hold the
or
button until “MANUAL” appears on LCD display, it will change into manual searching mode.
Press the
or
button repeatedly to manually search upward or downward step by step for the desired radio station within
the current band. For fast manual searching, press and hold the
or
button.
In manual search process, if neither of the both buttons have been pressed within 5 seconds, the radio will go to automatic
search mode automatically. “AUTO” appears on the LCD display.
GB-14
