5)
Bend the duct at a gentle angle, avoiding a sharp 90 degree corner, and slide the duct collar over the
transition duct. Make sure to maintain the 10” diameter of the duct throughout the bend to ensure
proper airflow. Connect the duct to the inlet collar of the fan
.
6)
Plug the power cord into a 115 Volt switched outlet that has been wired to local codes and standards.
This outlet may be switched from a remote location.
Operation
Important
- Be sure at least one window is open when the fan is operating.
1.
Turn the wall switch to ON. The fan will start and the damper will open.
2.
Turn the wall switch to OFF. The fan will stop and the damper will close.
When the fan rotation has slowed the magnet will pull the damper closed.
Care
The motor in
The
Infinity 1100 CQ
is permanently sealed and does not require oiling. To keep dirt, dust
and debris from the fan we recommend that you periodically clean the grille from within the living space
and dust the fan blades from within the attic. Please remember to make sure that the fan is OFF before
dusting the fan blades.
Troubleshooting
The most common problem with
The
Infinity 1100 CQ
is caused by incorrect wiring. Verify the switched
outlet has 115 Volts.
Specifications
Electrical Requirements:
Air Flow:
Duct Size:
Duct Collar Length:
Duct Length:
Interior Grille Dimensions:
Transition Duct Dimensions:
Mounting Flange Dimensions:
Overall Dimensions:
Overall Dimensions w/Damper Open:
Unit Weight:
115V, 60Hz, 1.5A
1070 cfm @ .1
"
Wg
10”
3
"
with Bead
6 ft.
14
"
x 14
"
10
"
Dia x 14
"
Sq x 10
"
L
14-1/4
"
x 1-1/2
"
16-1/4
"W
x 16
"
H x 6-1/4
"
D
13
"
13 lbs.
320 Main Street / Buzzards Bay, MA 02532
508-759-4660 / 800-222-5932 / Fax 508-759-6001
