6
5.
How do I check if software updates are available for the HV1600 Hub?
A.
Select the Hub from the Device Management screen.
B.
Select the Gear icon, located at the upper-right corner of the screen.
C.
Select About.
D.
The About screen will show the current firmware version installed.
E.
If a software update is available for the Hub, the Upgrade button will be selectable.
F.
To start the upgrade process, press Upgrade
6.
How do I perform a “Factory Reset”?
A.
Factory Reset allows you to return the Hub to the default factory settings. All information added
to the Hub will be forgotten after the reset is performed.
B.
There are two methods of performing a factory reset to the Hub.
1
st
Method: From the Tamarack app, within the Diagnostics menu.
Select the Hub from the Device Management screen to be reset.
Select the Gear Icon, located at the upper-right of the screen.
Select Diagnostics.
Press Factory Reset.
Press Reset.
2
nd
Method: With access to the installed HV1600 Hub location.
Access the two buttons marked as Join and Fan on the face of the Hub.
Press and hold the two buttons until two LED’s start to blink.
Release the buttons, the Factory Reset is complete.
After a factory reset has been performed repeat the “Out of box” instructions to begin
the setup process from the beginning. Listed on page 2, Step 1.
Optional: Wiring manual switches to bypass the wireless Hub to control the fan.
There are wires located in the junction box hard mounted to the Wi-Fi Hub to allow for the use of two SP/ST (single pole /
single throw) wall switches to bypass the Wi-Fi Hub method of control. When the manual switches are in use the fan
cannot be turned off using the app or changed to low speed if the speed switch is set to high speed. See wiring instructions
portion of the installation manual for details.
2
nd
Method
