Installation Manual
10° tilt leg kit
[email protected] 1-800-819-7236 Ext 556
Page 5
Step 4. Attach front and rear legs to the U-foot
A.
With the channel open side facing the front (south) loosely assemble the front and rear legs to the
U-foot. (the short leg in front and the long leg on the rear) the flange nuts to be on the inside as
shown.
Step 5. Set front and rear leg angle
A.
Cut a template from a stiff material to set the angle of the front leg to the mounting surface.
B.
Adjust the front leg up or down for leveling with adjacent legs and set the angle of the front leg,
torque bolts to 12ft lbs.
C.
Repeat with the rear leg.
