Installation Manual
UNI-SP/01A
[email protected] 1-800-819-7236 Ext 556
Page 8
Installer Responsibility
The installer is solely responsible for:
i.
Complying with all applicable local or national building codes, including any that may supersede this manual.
ii.
Ensuring that Tamarack Solar and other products are appropriate for the particular installation and the
installation environment.
iii.
Using only Tamarack Solar parts and installer-supplied parts as specified by Tamarack Solar. Substitution
parts may void Warranty.
iv.
Ensuring safe installation of all electrical aspects of the PV array.
v.
Ensuring correct and appropriate design parameters are used in determining the design loading used for
the specific installation. Parameters, such as snow loading, wind speed, exposure and topographic factor
should be confirmed with the local building official or a licensed professional engineer.
NOTE: ALWAYS RECHECK TORQUE ON HOSE CLAMPS AFTER EXPOSURE TO WINDY CONDITIONS
Warranty Information
Tamarack Solar warrants each Mounting Structure to be free from defects in materials and workmanship for
ten (10)
years from the date of first purchase (“Warranty Period”), when installed properly and used for the
purpose for which it is designed, except for the finish, which shall be free from visible peeling, or cracking or
chalking under
normal atmospheric conditions for a period of three (3) years, from the earlier of 1) the date the
installation of the Product is completed, or 2) 30 days after the purchase of the Product by the original
Purchaser (“Finish Warranty”).
The Finish Warranty does not apply to any foreign residue deposited on the
finish. All installations in corrosive atmospheric conditions are excluded. The Finish Warranty is VOID if the
practices specified by AAMA 609 & 610-02 – “Cleaning and Maintenance for Architecturally Finished
Aluminum” (www.aamanet.org) are not followed by Purchaser for Tamarack Solar’s aluminum based products.
The warranty covers the replacement cost of parts to repair the product to proper working condition.
Transportation and incidental costs associated with warranty items are not reimbursable. The warranty does
not
cover normal wear, or damage resulting from misuse, abuse, improper installation, negligence, or accident.
The warranty does not cover any defect that has not been reported in writing to Tamarack Solar within ten
(10) days after
discovery of such defect. Furthermore, it does not cover units that have been altered, modified
or repaired without
written authorization from the manufacturer or its authorized representative, or units
used in a manner or for a purpose other than that specified by the manufacturer. Tamarack Solar’s entire
liability and Purchaser exclusive remedy,
whether in contract, tort or otherwise, for any claim related to or
arising out of breach of the warranty covering the Mounting Structures shall be correction of defects by repair,
replacement, or credit, at Tamarack Solar’s discretion. Refurbished Mounting Structures may be used to repair
or replace the Mounting Structures.
Tamarack Solar shall have no liability for any injuries or damages to persons or property resulting from any cause,
whatsoever, or any claims or demands brought against Tamarack Solar by Purchaser, any employee of Purchaser,
client of Purchaser, end-user of the Product or other party, even if Tamarack Solar has been advised of the
possibility of such claims or demands (collectively, “Third Party Claims”). This limitation applies to all materials
provided by Tamarack Solar during and after the Warranty
