Installation Manual
UNI-SP/01A
1-800-819-7236 Ext 556
Page 1
Bolt Size
Dry
Lubricated
1\4-20
6 \ (75)
5 \ (64)
5\16-18
11 \ (132) 9 \ (112)
18-8 Stainless
Torque Values in Ft Lbs \ (In Lb)
Table of Contents
Introduction ............................................................................................................................................ 1
Customer Support.................................................................................................................................... 1
Tools Required ......................................................................................................................................... 1
Components List ...................................................................................................................................... 2
Structural Components Views .................................................................................................................. 2
Step 1. Measure PV Mounting Hole Distance .................................................................................................3
Step 2. Mounting Rail Supports on PV Module .............................................................................................3
Step 3. Attaching Clips to Rails .......................................................................................................................5
Step 4. Attaching Bucket to Pole ....................................................................................................................6
Step 5. Mounting PV Assembly on Pole ............................................................................................................7
Installer Responsibility ...................................................................................................................................8
Warranty Information .....................................................................................................................................8
Introduction
The UNI-SP/01A Side of Pole Mount is a simple and universal pole mounting solution for PV modules
with an area of less than 7 square feet. With its user-adjustable angle settings, the Side of Pole Mount
can support installations in a wide range of locations. These can be installed on 2 to 4 inch schedule 40
pipe which have an outside diameter of 2.375 inches to 4.5 inches, flat surfaces, and a 25G ROHN tower
frame. The module support rails can be adjusted for module tilt angles from 0 to 90 .
Customer Support
Tamarack Solar makes every effort to ensure your
mounting kit is easy to install. If you need assistance
at any point in your installation or have suggestions on how
we can improve your experience, call
customer
support at
1-800-819-7236 ext 556
or email us at
Tools Required
Tools that support the following size Hex heads: The use of anti-seize lubricant on
Stainless
hardware is
highly recommended to reduce the chance of galling.
Torque wrench with a range of up to 144 inch-pounds or 12 Ft-Lbs
5/16 “ socket (for the hose clamps - torque to 35 Inch-pounds)
7/16 “ socket
1/2 “ socket
