Tamarack Industries Thawzall XHR700 Operator'S Manual Download Page 2

Page: 2 / 56

As a new customer of Thawzall we would like to welcome you! We are looking

forward to providing you with technical support for your Thawzall unit. Whatever you

need we are here to help.

Ways to contact us for support

By Phone : 1-888-757-3545

The main Technical support phone line is staffed monday-friday 7:00 AM to 3:30

PM excluding holidays.

After hours support

Calls received outside of regular hours are directed to the On-call technician. Af-

ter hours support is reserved for issues that cannot wait until the next business day

for resolution. If no answer please leave a message and we will get back to you as

soon as possible.

By Email : [email protected]

Feel free to email us at any time with technical questions or parts inquiries.

Please include the year make and model of your unit if you have a specific ques

tion about your machine so we can better help you. If it is an emergency please call

1-888-757-3545

For more information please visit our website

www.thawzall.com

Summary of Contents for Thawzall XHR700

























































Search results

Summary of Contents for Thawzall XHR700

Reviews:

Brands by name

Popular brands

Tamarack Industries Thawzall XHR700, Operator'S Manual

Search results

Summary of Contents for Thawzall XHR700

Reviews:

Brands by name

Popular brands