Talyn Plus 2, Installation & Operation Manual

Page: 20 / 31

17
4 spheres test, welding load,
ASTM D 2509, kg
315
Test Timken OK load, ASTM D
2509, lb
45
Stability of oxidization bomb
method, ASTM D 942, pressure
drop at 100 hours, kPa
35
Corrosion prevention, ASTM D
1743
Passed
Emcor rust, IP 220, wash away
with acid water
0
Rust protection, IP 220-mod,
wash away with distilled water
0
Corrosion on copper, ASTM D
4048
1A
Resistance to water spray,
ASTM D 4049, % spray
15
Wash away with water, ASMT
D 1264, loss (weight%), @
79°C
5
SCRAPPING
If the machine is to be scrapped, separate all
electrical, electronic, plastic and ferrous
components and dispose of them separately, as
provided for by local regulations in force.
ENVIRONMENT INFORMATION
If the machines have the crossed-out bin symbol
on their data plate , the following disposal
procedure must be applied to.
This product may contain substances that can be
hazardous to the environment and to human
health if it is not disposed of properly.
Electrical and electronic equipment must never
be disposed of in the usual municipal waste but
must be separately collected for their proper
treatment.
The crossed-out bin symbol , placed on the
product and on this page, reminds the user that
the product must be disposed of properly at the
end of its life.
Thus, the hazardous consequences that
non-
specific treatments of the substances
contained in these products, or improper use of
parts of them, may have on the environment or on
human health are prevented. Furthermore, this
helps to recover, recycle and reuse many of the
materials contained in these products.
Electrical and electronic manufacturers and
distributors set up proper collection and treatment
systems for these products for this purpose.
Contact your local distributor to obtain information
on the collection procedures at the end of the life
of your product.
When purchasing this product, your distributor will
also inform you of the possibility to return another
end-of-life piece of equipment free of charge as
long as it is of equivalent type and had the same
functions as the purchased product.
Any disposal of the product performed in a
different way from that described above will be
liable to the penalties provided for by the national
regulations in force in the country where the
product is disposed of.
Further measures for environmental protection
are recommended: recycling of the internal and
external packaging of the product and proper
disposal of used batteries (only if contained in the
product).
Your help is crucial to reduce the amount of
natural resources used for manufacturing
electrical and electronic equipment, minimize the
use of landfills for product disposal and improve
the quality of life, preventing potentially
hazardous substances from being released in the
environment.
FIREFIGHTING MEANS TO BE USED