Owners Manual |
25
240V electrical wiring can only be altered or
changed in any way by a certified licensed
electrical contractor. Do not attempt any
240V wiring changes without consultation
with an electrician.
15 AMP main inlet &
power lead
Your 15 AMP main inlet is located on
the exterior of your RV. Ensure you use
a 15 AMP heavy duty power lead with a
minimum of 10 metres. This lead must be
kept in good condition. A damaged cord
should be replaced without delay with three
core thermoplastic or elastomeric sheathed
general purpose cord.
Circuit breaker (RCD)
The circuit breaker is a safety device
designed to disconnect the power if an
overload in the 240V circuit occurs. If the
circuit breaker trips, simply reset.
If it continues to trip, switch off major
appliances and check individually as there
may be a fault in an appliance or you may
be using too many appliances at once.
Electric kettles, fry pans etc have a very high
current draw. If a problem still exists, have
the circuit tested by an electrical contractor.
Electrical System 240V
