Owners Manual |
15
Electrical bed slide
The bed is moved in and out by an electric
motor and controlled by an electric switch,
the location of the switch may vary
dependant on model.
IMPORTANT:
•
Please make sure no objects are
obstructing the path of the bed slide
before operating switch.
•
Ensure cushions are not on moving
parts or other stationary items in the
vehicle to avoid jamming.
Slide-out unit
The slide-out unit is controlled by an
electric switch located in the vehicle’s main
switchboard. It also has a manual override
accessible from the outside of the vehicle
(winder handle required).
Before operating the slide out lounge please
familiarise yourself with the unit and refer
to the Manufacturer’s Manual provided with
the RV.
Please be aware that the slide-out unit is
equipped with a safety switch that will not
allow the vehicle to start until the unit has
been
fully
retracted.
Awning
There are different types of awnings
throughout the Talvor Product range.
Please refer to Manufacturer’s Manual for
operation and maintenance.
Please do not use the awning during rain or
windy conditions and please make sure it is
closed and secured before travel.
Hatches
Ensure that your hatch is completely closed
at all times prior to travelling as this could
not only let in excess dust and water but
could also cause damage to the hatch due
to excessive vibration when the hatch is
open.
windows
Condensation may occur where there
is insufficient ventilation or in extreme
weather conditions. It is important to leave
the windows partially opened to maintain
adequate air circulation, particularly in the
bed ends of campers when in use. Secure in
closed position before travelling.
water pump
The on/off switch for the water pump
is located at the main switchboard. It
is recommended that the pump switch
remains in the on position even when
connected to town water.
It is common that pumps will “cycle” when
stationary. This can be caused by uneven
vehicle levels or air in the lines. If this cycling
causes concern simply turn off pump when
not in use.
When travelling, make sure that the pump
switch is turned off.
Please refer to Manufacturer’s Manual for
further information on its operation.
Toilet
The toilet has a separate cassette waste
tank. Before you use the toilet please
switch on the water pump at the main
switchboard and refer to the Manufacturer’s
Manual for operation.
