manualshive.com logo in svg

TALOS ITR-CS15D, User Manual, Page: 33 / 40

Share
Download
TALOS ITR-CS15D User Manual Download Page 33

                                                                                                                                     

ITR-CS15D

 

Chapter 3

 

32 

Other operation mode 

Quarter 1 

The touchscreen will be mapped to the first quarter area of the 
specified monitor display. 

 

Quarter 2 

The touchscreen will be mapped to the 2nd quarter area of the 
specified monitor display. 

 

Quarter 3 

The touchscreen will be mapped to the 3rd quarter area of the 
specified monitor display. 

 

Quarter 4 

The touchscreen will be mapped to the 4th quarter area of the 
specified monitor display. 

 

Customized 

If the touchscreen needs to be mapped the area other than the 
above area, user can define the mapping area for application. With 
this mode, the driver does not correct the mapping area when the 
display resolution changed. It needs to do configuration setting again 
whenever the display resolution changed. 

 

3.6. Edge Compensation 

Edge Compensation property page contains functions of 

Edge 

Compensation

 for Top, Bottom, Left, Right, X Axis and Y Axis. 

 

 
 

Summary of Contents for ITR-CS15D









































Reviews:

No comments