manualshive.com logo in svg

TALOS ITR-CS15D, User Manual, Page: 27 / 40

Share
Download
TALOS ITR-CS15D User Manual Download Page 27

                                                                                                                                     

ITR-CS15D

 

Chapter 3

 

26 

Beep 

 

Beep On Touch 

 

Check this check box to enable driver to generate a beep sound when 
touch touchscreen state is switched from untouched to touched state. 

 

Beep On Release   

 

Check this check box to enable driver to generate a beep sound when 
touchscreen state is switched from touched state to untouched state. 

 

Frequency 

 

Drag the slider to adjust this frequency to control the beep sound 
frequency generated by the driver. 

 

Duration 

 

Drag the slider to adjust this duration to control the beep sound 
duration. 

 
Linearization Style 
 

TouchKit 

utility provides you with both 9 points and 25 points 

calibration for linearization. You can select the suitable linearization 
type. 

 
Double Click Time   

 

Double Click Time

 is used to set double click time. Change this value 

will affects the double click behavior for all of the mouse devices 
connected to the device. Two continuous clicks at the same area within 
this specified time period will be recognized as a double click event.   

 
 
 
 

Summary of Contents for ITR-CS15D









































Reviews:

No comments