62
2. ID For Remote Controller
Used to name the remote controller for running the system.
3. ID For Key Controller
Unique system controller number setting.
4. User Registration
Used to register, add, or delete users.
5. Admin. Password
Used to set the password of the Local System Administrator.
6. Upgrade
Upgrades the system firmware/system setup
7. Factory Setup
Initialize Setup.(Factory default value, except for the network
value)
8. POS
Set Ethernet POS or RS232
9. Alarm
Set the alarm On/Off and alarm format.
10. Alarm Duration
Set the alarm time by continuous/5/10/15/User setting
11. Menu Time Out
Used to set the time for exiting the System Setup menu
automatically and displaying the real-time monitoring screen.
12. Language
System OSD language setting
13. Video Loss Event Delay Time
It keeps ‘Video Loos’ during the setting period, then Video Loss
event comes out ( You can set Video Loss Event duration time
with 1/2/3/4/5 Sec)
6
-
7
-
1
DVR Name
. The initial value is the Mac address. (It supports up to 20 letters for the system name.)
)
6
-
7
-
2
ID for Remote Controller
When multiple devices are used, set the remote controller ID to identify input signals from the remote controller.
Only the system that DVR ID and remote controller ID match can receive input signals from
the remote controller as shown below.
①
Move to {Menu}
{Setup}
{System}
{2. Remote Controller ID}.
②
In the selection window, enter ID by using the arrow keys and the Select button (the number 0~99
is available for ID.)
If you forget the DVR ID, set the remote controller ID to 999 to start the DVR. Note, however,
that the DVR ID should be the same as the remote controller ID.
※
To configure Remote Controller ID
(Example: ID setting as 3)
1) Press {ID} button on the remote controller.
2) Press the {0} key and {3} key.
3) Press {ID} button again.
4) Remote Controller ID is set as 3.
6
-
7
-
3
ID For Keyboard Controller
③
Move to {Menu}
{Setup}
{System}
{3. ID for Key Controller.
④
In the selection window, enter ID by using the arrow keys and the Select button (the number 1~25
5 is available for ID.)