Talos Security DK1400 User Manual Download Page 42

Page: 42 / 47

Channel Alarm

allows you to set the DVR to respond to various alarm events.

Channel

allows you to set the desired channel for alarm trigger.

Event Type

allows you to define the type of alarm trigger the DVR will respond to.

Enable

allows you to toggle the alarm ON or OFF.

Sensitivity

allows you to control the threshold for alarm activation by motion.

Alarm Out Time

allow you to define the duration for the alarm activation.

Buzzer Time

allows you to control the duration of the internal alarm buzzer

Post Rec

allows you to define the amount of time after an alarm event the DVR will record.

Pre Rec Time

allows you to define the amount of time prior to an alarm event the DVR will record.

PTZ SETTING (Not Applicable to this DVR)

NETWORK SETTING

Click "Network Setting" to enter the network settings interface.

Basic Attributes
Type

allows you to select the network connection you will use with your DVR; DHCP or Static.

IP Address

allows you to set a specific address on your network.

Preferred DNS

allows you to use the DVR with an external IP address and Domain Name Service.

Media Port

is the port on your router the DVR uses to transmit a video stream.

Gateway

is the address of your router on your network.

MAC

is the specific identity of the DVR allowing devices to find it on a network.

Netmask

is the address of the DVR on a sub-group of your network.

Web Port

is the port on your router the DVR uses to receive requests from the internet.

PPPoE
PPPOE Enable

allows you to turn PPPoE ON or OFF.

User Name

is the name used to access the DVR by PPPoE.

Password

is the password used to access the DVR by PPPoE.

DDNS

Enable turns DDNS ON or OFF.

Service

allows you to select the DDNS service you are using.

Host Name

is the host name you created when you opened your DDNS account.

User Name

is the user name you created when you opened your DDNS account.

Password

is the password you created when you opened your DDNS account.

Summary of Contents for DK1400
















































Search results

Summary of Contents for DK1400

Reviews:

Related manuals for DK1400

Brands by name

Popular brands

Talos Security DK1400, User Manual

Search results

Summary of Contents for DK1400

Reviews:

Related manuals for DK1400

Brands by name

Popular brands