TW5340 User Manual
25
©2014 -2015 Tallysman Wireless, Inc.
Confidential
Message List 1 rate:
Sets message list 1 output rate. The rate is specified as the number of fixes between
message output.
Message List 2 rate:
Sets message list 2 output rate.
There is No Message List 3 rate:
Messages from list 3 are always output at the fix rate.
NMEA Message List 1
The basic output message list is shown in Figure 13. Additional outputs are available in
expert mode, contact Tallysman for details.
Figure 13
Message list 1 is the standard message list. Use message list 1 if the NMEA multiple
output rate feature is not required.
NMEA Message List 2
Use to output messages at a different rate. For example GSV and GSA can be output at
a much lower rate than RMC or GGA.
NMEA Message List 3
Message list 3 is reserved for those messages which need to be sent at a high rate
(10hz) and /or require accurate message output timing (low jitter). If high rate
messages or low jitter messages are not required, this message list should not be used.
If you are outputting message list 3 at 10 Hz, message list 1 & 2 should be disabled. If
additional lists outputs are required the output message rate of list 1 will need to be
