TW5352 Installation Manual
7
3.4
Device Communication
The TW5352 smart antenna has been factory configured for out of the box
operation. When the device is powered and enabled, NMEA messaging will be active
immediately on the RS-232 TX signal pin.
The device has been factory configured as:
9600,8,N,1
3.5
NMEA Messages
The TW5352 has the following NMEA messages active by default:
GNRMC
GNVTG
GNGGA
GNGSA
GPGSV
GLGSV
GAGSV
GNGLL
3.6
TW5352 Configured Settings
The TW5352 has been configured with the following specific settings set:
-
NMEA Version -> 4.1 (Required to support Galileo Constellation)
-
GNSS Configuration
o
GPS
o
GALILEO
o
GLONASS
-
Navigation Dynamic Model -> Automotive
3.7
Flash Configuration
The TW5352 contains flash storage memory for persisting customized configuration
settings. Configuration settings may be adjusted using a PC with the 27-0124-0
configuration cable.
The Tallymatics TW5352 configuration tool may be downloaded from the following
link:
https://tallysman.com/downloads/TW5X5X.zip
Please contact Tallymatics for assistance regarding factory programmed custom
configuration requirements.
