manualshive.com logo in svg

TallyGenicom Intelliprint 8026DN, User Manual

Share
Download
TallyGenicom Intelliprint 8026DN User Manual Download Page 72

Jun 06

2-18

TallyGenicom Intelliprint 8026DN Color Laser Printer User Guide

Cleaning the Printer

Cleaning the Density Sensor

When the printers density sensor is dirty, follow the procedure below to clean it.

 CAUTION

• Do not touch the edge of the plate at the upper side of the transfer roll cartridge because it is 

sharp.

1. Turn off the printer.
2. Push up the button 1 and fully open the front cover 2.

3. Grip the tabs at both ends of the transfer roll cartridge and gently lift it out of the printer.

NOTE:

Do not touch inside the printer with your hands. Some parts may be hot. Allow time 

for the printer to cool before attempting to remove parts in this area.

Summary of Contents for Intelliprint 8026DN

























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands