TallyGenicom 2365, User Manual

Page: 159 / 186

User guide Emulations
149
Additional information is provided in the Programmer’s Appli-
cation Manual on this CD-ROM.
<ESC><SO> Double-wide printing ON
<ESC><SP><n> Set character spacing
<ESC>t<n> Select character set
<ESC>T Superscript or subscript OFF
<ESC>U<n> Unidirectional print ON/OFF
<ESC>Un Unidirectional print ON/OFF
<ESC>W<n> Continuous double width ON/OFF
<ESC>w<n> Double height print ON/OFF
<ESC>x<n> Set print quality (PQ)
<ESC>x<0> sets Draft or HS
<ESC>x<1> sets LQ or HQ
<ESC>X Font selection according to pitch and points
<ESC>X<n><m> Set left and right margin
<ESC>Y<n1> <n2> Set graphics print to 120 dpi
<ESC>Z<n1> <n2> Set graphics print to 240 dpi
<ESC>+F Assign character set G3
<ESC>| Character generator LS3R
<ESC>} Character generator LS2R
<ESC>~ Character generator LS1R
<FF> Form feed
<HT> Horizontal tab jump
<HTS> Set tab stop at actual horizontal position
<IND> Line feed without CR
<LF> Line feed
<NEL> Line feed with CR
<PLD> Half step line feed
<PLU> Half step line feed back
<RI> Line feed without CR back
<SI> Condensed printing of 17.1 cpi ON
<SI> Switching the character generator (SS 3)
<SO> Double-wide printing ON
<SO> Switching the character generator (SS 2)
<VT> Vertical tab jump
<VTS> Set tab stop at current vertical position
MTPL
IBM
XL24
IBM
AGM
Epson
LQ-2550
Epson
LQ-2170
Code Function