Tally XPRESS T9412i, Network User'S Manual

Page: 74 / 76

68 Appendix E, Safety Information
FCC S
TATEMENT
For United States
Federal Communications Commission Radio Frequency
Interference Statement.
WARNING! Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user’s authority to operate the
equipment.
note: This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the
user should to try to correct it by the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and
receiver
• Connect the equipment to an outlet on a circuit different
from the one to which the receiver is connected
• Consult the dealer or an experienced radio or TV
technician for help
Use a shielded and properly grounded I/O cable to ensure
compliance of this unit to the specified limits of the rules.
If your printer is the Tally Xpress T9412n model or if you
have installed the optional Network Interface Card (NIC), the
printer meets the requirements of FCC Class A when
connected to an Ethernet cable.
For Canada
This digital apparatus does not exceed the Class B limits for
radio noise emissions from digital apparatus as set out in the
radio interference regulations of the Canadian Department of
Communications.
Le présent appareil numerique n’émet pas de bruits
radioélectriques dépassant les limites applicables aux
appareils numériques de Classe B présentes dans le
règlement sur le brouillage radioélectriques édicaté par le
Ministère de Communications du Canada.
Declaration of Conformity
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received,
including interference that may cause undesired
operation.
U.S. Responsible Party:
Address:
Tally Printers
P.O. Box 97018
Kent, WA 98064-9718
Telephone Number: 800-338-3010
Type of product: Laser Printer
Equipment Classification: Class B Peripheral
Model: Xpress T9412i, Xpress T9412n
We hereby declare that the equipment specified
above conforms to the technical standards as
specified in the FCC Rules.