Tally T 2045, Operator'S Manual

Page: 9 / 54

Now place the cover supplied on the printer. This cover replaces the
front cover previously removed and serves as a support for the feed
mechanism.
Holding the cover at a 45 degree angle place it on the printer as shown
in the diagram.
First place the recess on the left side of the cover in the mounting pin on
the printer (
➀
). Then insert the holder on the right side (
➁
) into the pin
on the printer and turn the cover down.
Starting on the next page the description is again valid for all models !
↓ ↑
↓ ↑
➁
➀
ENGLISCH
Installing the face down option
5