Tally T 2045, Operator'S Manual

Page: 7 / 54

Installing the face
down option
Remove the protection cap on the printer housing first.
For reasons of design, this cap is not present on certain models.
Loosen the cover on the printer housing by means of a small screwdriver
or another pointed tool (scissors, etc.) and pull off the cap in an upward
direction.
Keep the cover in a save place. For safety reasons the cover should be
re-installed, when the face down option is not used.
Caution: Danger of catching long hair or necklaces, etc. during opera-
tion.
↓ ↑
↓ ↑
↓ ↑
↓ ↑
ENGLISCH
Installing the face down option
3