Tally Dascom 1125, User Manual

Page: 49 / 104

Tally Dascom 1125
35
printed above.
7 . Once the setting which gives the best alignment is found, press
【
Online
】
key to exit current level.
Printer will print “Save settings? Yes”. Press
【
LF/FF
】
key to save setting. Press
【
Online
】
key a few
times until the printer exits the Service Menu.
Change Pin Function
When printer has been used for a long time or the print volume is high, the frequently used print head pins may
fail. The Change Pin function enables the user to continue using the printer for a while without compromise in
print quality until a suitable print head replacement is available. This function will reduce the print speed if
activated.
Change Pin Procedure:
1. Enter the Service Menu by holding down the
【
Tear/Off
】
and
【
LF/FF
】
keys while powering up.
2. Load paper.
3. The printer will print as below:
Service Menu
【
LF/FF
】
=OK
【
Tear/Off
】
= Back
【
Load/Eject
】
= Next
【
Online
】
= Exit
Current Menu
：
Vertical Alignment
Press
【
Load/Eject
】
key to scroll to “Change Pin”
，
then press
【
LF/FF
】
key to select. The status
of each pin will be printed as follows:
Change Pin
1 ---------- Is this pin OK? Yes / No
2 ---------- Is this pin OK? Yes / No
3 ---------- Is this pin OK? Yes / No
:
24 ---------- Is this pin OK? Yes / No
Press
【
Load/Eject
】
key to choose whether the pin is Yes or No
，
then press
【
LF/FF
】
key to confirm
selection.
4. When all the 24 pins are evaluated, press
【
Online
】
. The printer will print “Save settings? Yes” . Press
【
LF/FF
】
key to confirm selection. Press
【
Online
】
key a few times until the printer exits the Service
Menu.