background image

 

 

 

6 General Specifications

 

 

Print System 

Serial impact dot matrix 

Print 
Technology 

Uni-/bi-directional logic seeking for text and graphics (software selectable) 

Pitch DRAFT  NLQ  LQ 
10 CPI 

300 CPS 

200 CPS 

100 CPS 

12 CPI 

360 CPS 

240 CPS 

120 CPS 

Print Speed 

15 CPI 

450 CPS 

300 CPS 

150 CPS 

Print Head 

Number of pins:            24 pins/ 12x2 staggered 
Life:                      400 million strokes/pin  
Pin diameter:              0.2 mm 

Font 

Draft, Roman, Sans Serif, Courier, Prestige, Script, OCR-B,OCR-A, 
ORATOR,GOTHIC,SOUVENIR 

Character Set 

Standard character set I

Standard character set II 

IBM character set I

IBM character set II 

OCR-A character set I

OCR-A character set II 

OCR-B character set I

OC-B character set II 

International Character sets:15 country (see the note) 
Note

USA

France

Germany

UK

Denmark I

Sweden

Italy

Spain I

Japan

Norway

Denmark II

Spain II

Latin America

Denmark/Norway

China 

Printable 
Columns 

Characters per line (CPL) 
Pica (10 CPI)                              82 CPL 
Elite(12 CPI)                                98 CPL 
Micron(15 CPI)              123 CPL 
Condensed(17.1 CPI)         140 CPL 
Condensed Elite(20 CPI)     164 CPL 
Proportional                 changeable 

Font Matrix 

Character                          Matrix(Draft)                    Matrix(LQ) 
Pica                                      24*12                                  24*36 
Elite                                      24*10                                  24*30 
Half condensed         16*7                  16*10 
Super/Subscript         16*8                  16*24 
Proportional                                   24*n 
Proportional super/subscript                     16*n 

Graphics 

Graphics Matrix                         DPI 
8*480(single density)                     60 
8*960(double density)                    120 
8*960(high speed double density*)         120 
8*1920(quadruple density*)               240 
8*640(CRT I)                            80 
8*720(CRT II)                           90 
24*480(single density)                    60 
24*960(double density)                   120 
24*720(CRT III)                         90 
24*1440(triple)                          180 
24*2880(sextuple*)                      360 
(note: the asterisk marks only printing one adjacent dot ) 

Line Spacing 

1/6", 1/8", n/60", n/180", n/360" 

Summary of Contents for 1330































Reviews: