Talkswitch CT.TS005.501401 Quick Manual Download Page 9

!

To load a pre-recorded Auto Attendant greeting

You can load a professionally pre-recorded

greeting to TalkSwitch by following these

steps:

1. Click on 

Load Auto Attendant

.

2. An information box opens asking

whether or not to continue. Click 

Yes

and follow the instructions. The file must

be an 8khz, 8-bit, mono, µ-law .wav file.

A sample greeting (Auto Attendant

Sample.wav) is provided in your

TalkSwitch folder. 

Record an Auto Attendant greeting

To record an Auto Attendant greeting for Auto Attendant 1:

1. Pick up any telephone connected to the TalkSwitch. You should hear a dial tone.

2. Press then 

3. Follow the prompts to record your message. When your greeting is complete, 

press 

to end the recording.

Set up and record voicemail

To set a password, record a personal greeting, and record your name for the company

directory:

1. Pick up any telephone connected to TalkSwitch. You should hear a dial tone.

2. Dial 

and your mailbox number. Your mailbox number is equivalent to your

extension number. 

3. Follow the prompts to set a password, record a personal greeting, and record your

name for the company directory.

For complete details, refer to Quick Guide 

Configuring Auto Attendants

, and/or

TalkSwitch User Guide

.

NOTE:

Failure to Record an Auto Attendant will cause your office phone to answer with

no message. The caller will hear ‘dead air’ and will assume that they are not connected,

causing them the hang up the phone.

*

*

#

#

1

4

#

W W W.T A L K S W I T C H . C O M

8

C O N F I G U R I N G F A X D E T E C T I O N

About TalkSwitch

TalkSwitch® is dedicated to providing small
and multi-location businesses with innovative
telecommunications solutions. Since 1990,
TalkSwitch has delivered rich features, high
functionality and unbeatable value. Ideal for
businesses with up to 32 telephone users per
office, TalkSwitch systems provide users with
options to connect to both the traditional 
telephone network (PSTN) and Voice over IP
(VoIP) networks. TalkSwitch is headquartered
in Ottawa, Canada. For more information, visit
us at

www.talkswitch.com

, or call us toll free

in North America at 1.888.332.9322. In all
other markets call +1.613.725.2980.

© TalkSwitch 2006

We trust that

Quick Guide

has been useful. If you have any further questions, please

contact your authorized TalkSwitch reseller. If you purchased directly from TalkSwitch,
visit

www.talkswitch.com/support

or call 

1.866.393.9960

(North America).

We welcome your feedback, comments and suggestions. Please e-mail us at

[email protected]

or write us at

TalkSwitch, 1545 Carling Avenue, Suite 510,

Ottawa, ON  Canada K1Z 8P9

.

Summary of Contents for CT.TS005.501401










Reviews: