All rights reserved. © 2012-2023 Shenzhen Talkpod Technology Co., Ltd.
Attachment Installation
Installing the Battery:
Align the battery with the two small tabs on the bottom of the radio's
casing. Press the battery towards the aluminum plate, and the small
sliders on the upper left and right sides will click simultaneously,
indicating that the battery is properly installed.
Removing the Battery:
On the upper left and right sides of the battery, there are two small sliders
with arrow symbols. Press them downward simultaneously to remove the
battery.
Installing the Belt Clip:
Remove the battery first. Align the smooth slot on the back of the battery
with the belt clip, and press the belt clip downward to secure it in place.
Removing the Belt Clip:
Remove the battery first. Press down the elastic plastic piece in the
middle of the belt clip and simultaneously pull it upward to remove the
belt clip.
Installing the Antenna:
Hold the bottom of the antenna and rotate it clockwise into the antenna
socket on the top of the radio until it is securely tightened.
Removing the Antenna:
To remove the antenna, simply rotate it counterclockwise and detach it
from the antenna socket.
