All rights reserved. © 2012-2023 Shenzhen Talkpod Technology Co., Ltd.
Main Functions
Power On/Off
1.
Rotate the power knob in a clockwise direction to turn on the power of
the transceiver.
2.To turn off the power of the transceiver, rotate the power knob in a
counterclockwise direction.
Adjusting the Volume
Rotate the volume control knob clockwise to increase the volume and
counterclockwise to decrease it. If you cannot hear background noise due
to the squelch function, press and hold the "Side Key 3" while turning the
volume control knob to hear the background noise.
Selecting a Frequency
Press the "Up" key to increase the frequency and the "Down" key to
decrease it.
If you are unable to select a specific frequency, you may need to change
the frequency step size. Please refer to the section on changing the
frequency step size.
You can also directly enter the desired frequency using the numeric
keypad. Please refer to the section on direct keypad input.
Transmission
1.When you are ready to transmit, hold down the "PTT" (Push-to-Talk)
key and speak in a normal tone.
◉
The transmit indicator will light up in red.
◉
If you are too close to the microphone or speak too loudly, it may cause
distortion and reduce the clarity of your signal at the receiving end.
◉
Selecting a lower power level conserves more battery power without
affecting the communication range. You can choose between high and
low power settings.
2.When you finish speaking, release the "PTT" key and prepare to receive
