4
7.
To record, press and hold the "RECORD/PAUSE" Button on the front panel until you see the countdown begin on the
Front Display. Then, release the button and begin recording your message by speaking clearly into the Internal Mic
under the top perforated grill of the unit, or into a hand-held mic plugged in to the "MIC" Jack on the rear of the unit,
or by starting an external source plugged into the "LINE INPUT" Jack on the rear of the unit. The front panel digital
display will count down the total record time available, but you can pause recording at any time by pushing the
"RECORD" Button again. Then, finish the record process by pushing the "PLAY" Button, or continue recording by
pushing the "RECORD/PAUSE" Button again.
8.
Next, determine an open frequency in your area and set this frequency on the front panel display using the
"UP/DOWN" Arrow Keys. Please see the “Frequency Selection” page in this manual to select the best frequency.
9.
Finally, monitor the radio signal on a good car radio to check coverage and audio quality. You can try different
transmitter locations and frequency selection to improve coverage and minimize noise.
