INGLÉS
5 / 14
MAKING COMMUNICATIONS
The Radio has 8 main channels & 38 CTCSS
code. You can communicate with any other
user who is using the same main channel &
CTCSS code.
Speak to other radio
1.
Press & hold the PTT key, transmit LED turn
on.
2.
Hold the unit in a vertical position with
the Microphone 5-8cm from the mouth
and then speak
3.
When you finish speaking, release the PTT
key and you will hear a beep tone.
Listen to other radio
1.
When you press the PTT key, you can not
listen to other radio. Make sure you do not
press the PTT key for listening.
2.
Adjust volume control if necessary.
ADJUSTING SPEAKER VOLUME (8 LEVEL)
1. Press the key to increase the volume.
2.
Press the
key to decrease the volume.
OVERTIME FUNCTION
1.
Overtime function can avoid transmitting
by chance and to prolong the battery life.
2.
The radio will end to transmit and utter a
warning tone when PTT is held over 60
seconds. You then need to release PTT and
press it again for further transmission.
3.
In VOX mode, the unit will stop transmitting and
utter a warning tone after continuing talk for 60
seconds. You can re-activate VOX after the
overtime stop. (Please refer to VOX function for
details VOX operation)
TALK RANGE
The communication range is optimal in open field
and is vary in different environment:
Optimal Range–range up to 3 km in open field
Medium Range – reduced range in area with obstacle
of trees, houses.
Shortest Range– further reduced range in dense
forest, high mountain, tall building area.
Warning - Do not transmit within 1.5 meter among
other radio because of interference.
