6
Setup with Proloquo2Go
Single-switch scanning
(1 switch, connected to Port 1):
Mode - Automatic Scanning
: (default) Highlighted selection advances
through items automatically. When item desired is highlighted, press the
switch.
Mode - Automatic Selecting
: Advances automatically through items
when switch is held and selection occurs upon release.
1. Ensure desired Mode is selected. Adjust scan Pattern and Speed as
desired.
2. Under Switch, select
External
>
Enter
>
Back
.
3. When scanning settings are adjusted as preferred, close the Options by
tapping the gear icon. Tap the play button in the top left corner of the
screen to begin scanning. Press your switch to begin.
Two-switch scanning
:
Mode - Step Scanning
: (two switches required) hit “mover” switch to
move between items. When desired item is selected, hit “chooser” switch.
Mode - Automatic Step Scanning
: Uses the screen as a “stepper”
switch and an external switch as the “picker” switch.
1. Under
Mode
, select
Step Scanning
. Adjust scan Pattern and Speed as
desired.
2. Under
stepper switch
, select
External
>
Space
>
Back
.
3. Under
picker switch
, select
External
>
Enter
>
Back
.
4. When scanning settings are adjusted as preferred, close the Options by
tapping the gear icon. Tap the play button in the top left corner of the
screen to begin scanning. Then, press your switch to begin.
Additional Notes on Scanning with Proloquo2Go
:
Advanced setup options are available, for example changing visual cues,
auditory cues, looping settings and more.
Scanning options only apply to the current user and will need to be
adjusted if changing users.
Return to the communication app,
Proloquo2Go
. Open
Options
>
Access Method
> and toggle on
Scanning
.
Select
Configuration
.
Now you can select your Scanning Mode and Pattern.
