The information contained herein may be changed by Deeco Services without notice. Deeco Services shall not be held liable for any errors
National Service and Supply Centre
35 Wakefield Street, Alicetown 5010
www.deeco.co.nz
The screen consists of several fields, some of them are editable and some of them are
not. For inserting EDIT MODE, push the ENTER key.
The EDIT MODE is indicated by blinking of the characters at the currently editable field.
Each time the ENTER key is pushed again, the next editable field becomes under focus
and starts blinking.
While in EDIT MODE the “+” and “-“ keys can be used for changing the value under focus.
Pushing the ENTER key again will set the selected value to the current field and move the
focus to the next editable field which will start blinking.
Once entering this process of passing through the editable fields, the user has no way
back but by pushing the ENTER key repeatedly, he passes through the chain of editable
fields until arriving back to the FLUSH TIME field, meeting no more blinking fields.
Notice that before the first use of the unit, it may be necessary to pass through the
configuration process prior to defining the flushing program in order to adjust the
features of controller to the specific application. The configuration process is
described below.
The Chain of Editable Fields
Following is the chain of editable fields. The existence of the DP SET-POINT field depends
on whether the system contains a built-in electronic DP or not.
