Talex Spółka z ograniczoną
odpowiedzialnością
Spółka komandytowa
ul. Dworcowa 9c , 77-141 Borzytuchom
tel.
(59) 821 13 40
Page
25
of
25
When adjusting the roller brush, make sure the pressure is the same over the entire length of
the roller.
Uneven setting results in faster wear of the roller brush.
ATTENTION:
Excessive brush pressure on the cleaning surface causes
excessive wear.
7.2.2 Hydraulic drainage of the tub
The tub is emptied by changing the direction of oil flow in the hydraulic system, where the
return of oil generates the pressure needed to open the tub.
After emptying the tub, the original oil circuit required for the sweeper should be restored.
ATTENTION !!!
The tank can only be opened and closed with the sweeper lifted!!!
7.2.3 Sweeper operation without the waste tank