TALEX Spółka z ograniczoną odpowiedzialnością Sp.K.
ul. Dworcowa 9C
77-141 Borzytuchom
tel. (59) 821 13 26
e-mail.
User manual
OptiCUT disc mower
Page
4
of
61
TALEX guaranties efficient operation of the machine when operating it according to the
technical and operational conditions described in the User Manual.
The defects disclosed during the warranty period shall be removed by the Warranty Service.
The time of repairs is defined in the WARRANTY CARD.
Warranty does not cover parts and the machine components subject to wear under normal
operating conditions, regardless of warranty period.
Warranty service applies only to following cases: mechanical damages not due to fault of the
user, factory defects of the parts, etc.
The following parts/components are considered:
Cutting blades
Safety guards
Bearings
In cases, when damages occurred in result of:
fault of the user or a road collision
Inappropriate operating, adjustment and maintenance, using the machine not in
accordance with its purpose
Using a damaged machine
Repairing the machine by an unauthorized persons, inappropriate performance of
repairs
Performing arbitrary changes in design of machine,
User may lose warranty service.
The user is obligated to immediately report about any loss of paint or corrosion and to order
to remove those damages, regardless whether they are under warranty or not. The detailed
conditions of the warranty are included in the attached WARRANTY CARD.
WARNING!
Please demand from the seller of the machine to correctly fill out the WARRANTY
CARD and the complaint coupons. The lack of date of purchase or the seller’s stamp
exposes the user to the possible refusal of claims.
WARNING!
The tension of the V-belts should check after a few hours of operating the machine,
and if they are too loose, they should be stretched.
