Page
13
6.
SERVICING, STORAGE, DISPOSAL
Every day, after finishing the work, the shredder must be meticulously cleaned and its technical condition must be
inspected. The operator should especially pay attention to the wear of blades or beaters. Replace damaged or worn-out
parts.
Before starting the work, lubricate telescopic parts of the jointed telescopic shaft.
After the finished operation period:
Remove all the contaminations,
Check the condition of the machine and replace the worn-out parts using the ones recommended by the producer,
Lubricate the machine in accordance with the instructions of the lubrication scheme (Fig. 5),
Every 5 years, change fan belts and hydraulic hoses by replacing them for new ones.
All repairs and replacements of components of machine’s drive should be performed by authorized
mechanics equipped with required tools and devices.
6.1.
Storage
The shredder should be kept in a dry place and be additionally secured against the negative effects of unfavorable
weather conditions. If the machine is affected by any form of downpour, the lubrication procedure should be repeated
more often.
6.2.
Disassembly and disposal
The damaged or worn-out machine should be disposed in accordance with environment protection principles. In order to
do so:
- disassemble the machine
- dispose of metal elements at a junkyard.
7.
PARTS CATALOG
SPARE PARTS ORDERING:
While placing an order, provide the following:
Ordering party’s address,
Exact shipping address (together with the machine location and collection method),
Payment terms,
Serial number and the year of construction of the sweeper (provided on the nameplate),
Exact name of the spare part,
Number of ordered parts.
Spare parts shall be ordered in authorized outlets or directly from the producer.
INDEX OF FIGURES
Figure 1 Construction, mode of operation
