TALEX Spółka z ograniczoną odpowiedzialnością
Spółka komandytowa
ul. Dworcowa 9c, 77-141 Borzytuchom
tel. (59) 821 13 40
e-mail.
38
Table 4 Possible problems and solutions
8.
Disassembly, utilization and environment protection
Protect your hands (and body) against injuries, and the harmful effects of
lubricants and oils.
Use protective gloves and tools which are in good mechanical condition.
Machine elements, which when dismounting can move or rotate, must be properly secure
d.
Worn or damaged parts removed during repair (disassembly) should be stored in a separate
location, with a limited access for persons and animals. Worn out metal parts must be
delivered to the scrap metal collection points. Worn out plastics must be delivered to the
chemical waste collection (utilization) points.
When filling up or replacing the oil, avoid its spillage. Store the waste oil in sealed
containers, and periodically deliver it to the special collection (utilization) points.
Abandoned parts or machine components, and spilled oil, may pose a risk of
accident, cause an environmental pollution and violate applicable laws
.
During normal operation
the cutting unit leans
back, due to the action of
the break-back device
Poorly tightened or damaged
spring in the break-back
device
Check and adjust the spring tension;
replace if damaged
Local bumps, e.g. hardened
molehills
Reduce speed, and tilt the cutting unit
backwards
