4
TRANSMITTER FEATURES
1. MICROPHONE
HEAD:
Contains the dynamic mic capsule
2. MICROPHONE
ENCLOSURE:
Aluminum alloy enclosure with screw-on battery
compartment covering
3. IR (INFRARED) PORT:
To synchronize with receiver, hold the transmitter with the IR
port facing directly at the receiver's IR port at a distance between 2-8"
4. ON/OFF and MUTE SWITCH:
Top position turns mic on, middle position mutes the mic,
the bottom position turns the mic off
5. BATTERY
COMPARTMENT:
To replace batteries, unscrew the bottom mic covering in a
counter-clockwise direction and replace batteries making sure to insert the batteries with
the proper polar directions
SYSTEM SET-UP QUICK START GUIDE:
follow this guide for proper operation of the TWUH2
RECEIVER
Connect the receiver to the included 12VDC power supply to the DC input jack and power on
the receiver. When the receiver is operational the power on LED will illuminate.
CHANNEL SELECTION
For initial setup the transmitter and receiver will need to be synced.
If you are using more than one TWUH2 wireless microphone system or experience
interference/poor audio signal issues please select another channel on the receiver, there are
32 selectable channels (16 for each side).
Whenever the receiver channel is changed the transmitter and receiver will need to be synced again
The TWUH2 system has 32 (16 per side) adjustable channels, press the "Select" button to
assign a channel, each channel represents a separate operating frequency.
