background image

W

arranty

Manufacturer warrants this product to be free from defects in material and workmanship 

when used under normal conditions for five (5) years. Please complete and return the 

enclosed warranty card. For your reference, make a note of the serial number, date 

of purchase and supplier here.
Serial Number: _______________________________________________________
Date of Purchase: ____________________________________________________
Supplier: ____________________________________________________________

P

ackage

 c

ontents

Fixed Speed, Analog, Digital or Pulsing Vortex Mixer

72” (183cm) power cord

* (1) cup head

* (1) 3” (7.6cm) head

* (1) 3” (7.6cm) rubber head cover

Instruction manual

Warranty card
* These accessories come with all units except the Pulsing Vortex Mixer which is 

supplied with a 1.5 to 2mL Micro-Tube Holder with built-in cup head.

t

able

 

of

 c

ontents

Package Contents 

.  .  .  .  .  .  .  .  .  .  .  .  .  .  . 

1

Warranty 

.  .  .  .  .  .  .  .  .  .  .  .  .  .  . 

1

Installation 

.  .  .  .  .  .  .  .  .  .  .  .  .  .  . 

2

Maintenance & Servicing 

.  .  .  .  .  .  .  .  .  .  .  .  .  .  . 

2

Environmental Conditions 

.  .  .  .  .  .  .  .  .  .  .  .  .  .  . 

2

Safety Instructions 

.  .  .  .  .  .  .  .  .  .  .  .  .  .  . 

3

Standards & Regulations 

.  .  .  .  .  .  .  .  .  .  .  .  .  .  . 

3

Specifications 

.  .  .  .  .  .  .  .  .  .  .  .  .  .  . 

4

Digital & Pulsing Vortex Mixer Control Panel    .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 

5

Introduction 

.  .  .  .  .  .  .  .  .  .  .  .  .  .  . 

6

Operating Instructions 

.  .  .  .  .  .  .  .  .  .  .  .  .  .  . 

6-7

Head/Accessory Installation Instructions           .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 

8-9

Troubleshooting 

.  .  .  .  .  .  .  .  .  .  .  .  .  .  .   

10

Accessories 

.  .  .  .  .  .  .  .  .  .  .  .  .  .  .    11-12

1

Summary of Contents for Basic Vortex















Reviews: