Takstar XR26, User Manual

Page: 70 / 76

Gate page
The Noise Gate page displays the noise gate parameters of the channel. The noise threshold uses a
threshold to determine its "open" (over Threshold) or "closed" (below Threshold) status. When the
door is closed, the signal level is reduced or cut off completely. The threshold can be used to reduce
the ambient noise picked up by the microphone when the sound source (instrument / vocal) is silent.
ON: Noise gate switch.
RESET: Reset to the default value.
PRESETS: Call up the standard preset management pop-up box, save / load the noise gate preset.
THRESHOLD: Adjust the threshold of the noise gate. You can drag the "T" ball on the motion
graphic.
RANGE: Adjust the attenuation value. This parameter determines the attenuation value of the
attenuated signal.
ATTACK: Adjust the noise gate transient. This parameter is the speed at which the noise gate
responds and reaches the attenuation value set by the RANGE parameter.
HOLD:
Adjust the compression holding time of the noise gate.
RELEASE:
Adjust the noise gate release time. This is the speed at which the noise gate returns to
the "non-fading" level when the signal level rises above a threshold level.
69