Takstar XR26, User Manual

Page: 45 / 76

INTERFACE DESCRIPTION
1. Combined input interface
It is used to connect a microphone or balanced analog line input signal. The XLR interface is
used to connect a microphone, and the 6.35mm TRS in-line interface is used to connect balanced
line signals. These interfaces can p 48Vphantom power. This mixer has 12 combined
input interfaces.
2. 6.35mm TRS input interface
It is used to connect balanced analog line input signal. This mixer has eight 6.35mm TRS inputs,
including four mono analog inputs and two pairs of stereo analog input interface.
3. BUS XLR output interface
The balanced output interface from BUS 1 to BUS 6 adopts XLR socket. This mixer has 6 BUS
output interfaces.
4. MASTER bus XLR output interface
The main output is a balanced output interface of the MASTER L / R signal, and the interface
uses XLR socket.
5. AES / EBU XLR output interface
It is used for the XLR interface for outputting AES / EBU digital signals.
6. SPDIF coaxial input / output interface
It is used to input and output SPDIF digital audio signals. The upper side is the SPDIF signal
input interface and the lower side is the SPDIF signal output interface.
7. USB Host sound card interface
It is used to connect with a PC as an external USB sound card, and can realize two-way stereo
audio transmission with the PC.
8. RJ-45 network interface
It is used to directly connect this product to a computer or switch, and manage and operate this
product through the network access.
9. Power interface
It is used to power the mixer. Note: Before plugging or unplugging the power supply, please
make sure that the power switch above the interface is turned off.
10. Antenna interface
It is used for WIFI antenna of the mixer. Without installing the antenna, the mixer will not be
able to perform remote control via WIFI hotspot signals.
11. Monitoring output interface
The balanced output interface of stereo monitor
44