Takstar WDA-500, User Manual

Page: 36 / 40

If the speaker is used for the first time, it needs to match with cell phone or wireless
playing equipment as the steps below:
① Turn on the speaker. Press mode button. When the screen flashes“bLUE”, this
means it is in searching and matching status.
② Enter into cell phone Setting menu. Turn on the cell phone wireless function.
When it searches “TAKSTAR WDA-500”, click “TAKSTAR WDA-500” for
Connection.
③ When the speaker is turned on a second time and wireless mode is selected, it
matches with the playing equipment matched previously.
④ In the status of matching is successful, keep pressing “play/pause”button to
stop the playing.
■ Charging instruction
35
B.Bluetooth Matching
1. Please use the standard adapter for charging. Use the standard to connect with
AC~220V power socket and the speaker DC connector. Refer to the figure below:
2. When the speaker is turned on, the power symbol “ ” flashes and there is
sound prompt: “insufficient power, please charge”. This means the low battery
voltage.
3. During charging, it displays the power symbol. This means it is being charged.
When the power symbol disappears, this means it is being charged fully.
4. Please use standard power adapter to charge WDA-500. It takes about 4h. When
it is charged fully, please stop the charging.
Note: when it is used for the first time, it is recommended to charge it fully before
operation. If it will not be used for a long time, please charge the speaker every
half year to avoid over-discharging.