14
②
Connection for audio device without built-in 48V phantom power:
5
Fix the connection cable onto the mic stand or boom arm, and leave a section/loop
.
of cable at the mic. This helps to effectively isolate the vibration.
6 Please turn the volume to the minimum on the audio device before switching on
.
the phantom power. Then gradually increase the volume to an appropriate level. This
helps to prevent speaker damage by high sound pressure. Keep a proper distance
between the mic and the speakers to avoid feedback howling.
7 The mic output uses a three-pin XLR male connector, as shown below:
.
Female XLR to 3.5mm Audio Cable
Audio Interface
48V Phantom
Power
Male/Female XLR Cable
PC
Pin 1 (ground)
Pin 2 (+)
Pin 3 (-)
SM-18 PRO
PROFESSIONAL RECORDING MICROPHONE
Summary of Contents for SM-18 PRO
