Takstar SGC-200W, User Manual

Page: 34 / 40

32
2．Keep pressing SET button of transmitter for 2 seconds. Frequency flashes
on LCD. Release the button. Keep pr or ‒ button till the frequency
changes from flashing status to “— — —” status. Release the button.
3．It takes about 10 seconds to finish the frequency matching. When the
frequencies of transmitter and receiver change from “ — — —”status to
static number, the automatic matching finishes. If the matching is
successful, the transmitter frequency and the receiver frequency are the
same and vice versa. Match the frequency again. .
二：Matching frequency manually
1. Keep pressing SET button of receiver for 2 seconds. Frequency flashes on
LCD. Release the button. Keep pr or ‒ button to adjust to the
wanted frequency. After 5 seconds the receiver saves the selected
frequency and exit, or you can keep pressing SET button for 2 seconds to
exit.
2．Keep pressing SET button of transmitter for 2 seconds. Frequency flashes
on LCD. Release the button. Keep pr or ‒ button. After 5 seconds,
the transmitter saves the selected frequency and exits, or you can keep
pressing SET button for 2 seconds to exit.The matching is finished.
Note: when the transmitter and receiver are matched manually, if there is no
operation to select frequency via +/- button after 5 seconds, they go back
to the frequency status.
B: Matching frequency of dual channel model
1．Keep pressing SET button of receiver for 2 seconds to select channel. Press
SET button to switch channel A or B.
2．The following steps of matching frequency are the same with that of the
mono model. Please refer to the matching method of mono model.
SGC-200W
Wireless Camera Microphone