background image

19

Preface

Dear Customer, 

     Thank you for purchasing Takstar SGC-200W Wireless Camera 

Microphone  .  Please read the user manual carefully before operation and 
keep it for reference in future. 
If you have any question or suggestion, please contact our local dealer.

Features

1. Tailored for interview, video recording, suitable for camera/DSLR/cell 

phone, etc

2. UHF transmission without the trouble of cable connection
3. Automatic matching technology, easy operation, high anti-interference, 

about 100m operation range in open area

4. Real time audio monitoring function to monitor the recording status
5. Adjusting function of monitoring volume and recording volume to suit for 

different equipment application

6. Low cut function to reduce ambient noise effectively; clearer picking up
7. Dual channel independent output and combo output for convenient post 

processing

      Note: only dual channel model has this function. 
8. Type-C power connector to link with external power supply
9. Two Alkaline dry batteries last for about 10h operation

Application

Interview, video recording, program host, etc

SGC-200W 

Wireless Camera Microphone  

Summary of Contents for SGC-200W









































Reviews: