Takstar JD Series User Manual Download Page 22

Safety Instructions

To avoid electric shock, overheat, fire, radiation, explosion, mechanical risk and injury or property 

loss due to improper use, please read and observe the following items before use:

1

.Please check if the power of the connected equipment matches with that of this product before 

      

 

operation. Adjust the volume to proper level during operation. Do not operate at over-power or 

      

 

high-volume level for extended time to avoid product malfunction or hearing impairment.

2.If there is any abnormality during use (e.g., smoke, strange odor), please kill the power switch 

      

 

and unplug from power source, then send the product to the local dealer for repair.

3.Keep this product and its accessories in a dry and ventilated area. Do not store in a humid or 

      

 

dusty area for extended time. Keep away from fire, rain, liquid intrusion, bumping, throwing, 

      

 

vibrating, or from blocking any ventilation openings, to prevent malfunction.

4.The product must, when installed on walls or ceilings, be fixed firmly in place at adequate 

       

 

strength to prevent from falling.

5.Please abide by safety rules during operation. Do not use the product in places prohibited by 

       

laws or regulations to avoid accident.

6.Do not disassemble or repair the product by yourself to avoid injury. If you have any questions 

       

or require any services, please contact our local dealer.

About This Manual

This manual contains up-to-date technical specifications as of printing. However, specifications 

contained herein may not conform to your particular product since Takstar is constantly improving 

its products. Also, specifications, devices or accessories available may vary from region to region. 

If you have any questions, please contact our local dealer. For the latest version/more information, 

please visit our website: https://www.takstar.com/ 

JD Series Wireless Microphone System

21

Summary of Contents for JD Series

























Reviews: