Takstar JD Series, User Manual, Page: 18 / 24

17
Operation Instructions
1. Manual Frequency Adjustment:
Switch on the receiver power. On default home screen, press "SET" button once
② then press "
③
power up the transmitter, align both IR windows on the transmitter and the receiver within
10cm-30cm, and wait until the frequency shown on the transmitter changes to the receiver frequency.
If synced successfully, there should be AF audio signal when you talk to the mic. If failed to sync,
please retry all the afore steps.
① .
▲" or "▼" button on the respective channel to adjust to a desired frequency.
Next, press “SET” again to start pairing, the LCD screen will flicker and show "IR-". Meanwhile,
2. Automatic Frequency Scan:
Switch on the receiver power. On default home screen, press and hold “SET” button, then press
" ▲" or "▼" button on the respective channel .
② The receiver will start automatic frequency scan , and the screen will flicker as it scans. When it finds
the cleanest frequency available, the receiver will begin IR sync automatically. Meanwhile, power up
the transmitter, align both IR windows on the transmitter and the receiver to complete syncing.
①
JD Series Wireless Microphone System