●
UHF
low
power
consumption
technology
,
high
anti
-
interference
capability
,
more
than
50m
operation
range
●
Frequency
modulation;
Up
to
40
units
can
be
used
simultaneously
without
crosstalk
or
interference
●
Condenser
microphone
,
high
sensitivity
,
clear
vocal
●
Built
-
in
Li
-
ion
battery
lasts
for
6h
operation
1. Matching: turn on the headworn microphone. Keep pressing the
channel switching button for 3 seconds for the matching mode.
Turn on the receiver for automatic matching.
2. Frequency adjustment: for the matched equipments, press the
channel matching button of headworn microphone to the next
frequency channel (40 frequency channels in turn), then the receiver
automatically matches the new frequency channel.
To avoid electric shock, over temperature, catching fire, explosion,
mechanical risk and hurt or property loss caused by improper use,
please read the following items carefully before operation:
1. Adjust the volume to proper level during operation. Do not operate
at high volume level to avoid hearing loss.
2. If abnormal phenomenon (smoke, abnormal smell) happens, please
turn off the power switch and disconnect the power plug with power
socket, and send the product to local dealer for maintenance.
3. The product and accessories should be put in dry and ventilated
place rather than humid or dusty environment. Prevent the product
from fire, liquid, rain, water, over-colliding, throwing, vibrating, vent
hole covered to avoid function destroyed.
4. Please abide by safety rules during operation. Do not use the product
in the place prohibited by regulation or law to avoid accident.
5. Do not disassemble or repair the product by yourself to avoid hurt.
If you have question or need service, please contact the local dealer.
6. The applicable altitude and climate condition of this product is
subject to the power supply equipment.
● Frequency Response: 60Hz-16KHz
● Frequency Range: 630MHz-890MHz
● Operation Voltage: DC2.5-5.5V
● Battery: Li-ion battery 400mAh
● Charging Voltage: DC5V/100mA
● Charging Time: approximate 4h
● Operation Time: approximate 6h
● Sensitivity: -51 to -54dB
● Operation Range: open area 50m
● Net Weight: receiver: approximate 22g, transmitter: approximate 39g
UHF
Headworn
Microphone
Dear Customer,
Thank you for purchasing TAKSTAR HM-200W UHF
wireless headworn
microphone. Please read the user manual carefully before operation
and keep it for reference in future. If you have any question or
suggestion, please contact our local dealer.
Features
Caution
Operation Instruction
Wireless Headworn Microphone Function Instruction
Headworn microphone 1pc
Receiver 1pc
Charging cable 1pc
User manual 1pc
Application
Product Content
Specification
①
Power switch: push it to ON, and the blue LED
⑥
lights up. This
means the microphone is turned on. Push it to OFF, and the blue
LED
⑥
lights off. This means the microphone is turned off.
②
5V charging port: connect one end of USB charging cable with this
port, and the other end with USB output charger to charge the
microphone. The charging LED lights up red.
③
Channel switching button: press it shortly to switch channel. Keep
pressing it to enter into matching mode.
④
: press it shortly to increase the volume level.
⑤
Volume -: press it shortly to decrease the volume level.
⑥
Indicator: during matching channel, the blue LED flashes slowly,
and keeps lighting up during operation, and flashes quickly during
low voltage. During charging, the red LED keeps lighting up, and
lights off when being recharged fully.
Headworn microphone
Receiver
①
②
⑥
③
①
②
④
⑤
⑥
O
N
/O
F
F
D
C 5
V
●
Used with amplifier or speaker cabinet in speech, teaching, tour
guide, propaganda
Version: V1
Guangdong Takstar Electronic Co., Ltd.
Address: No. 2 Fu Kang Yi Rd., Longxi Boluo Huizhou, Guangdong 516121 China
Tel: +86 752 6383644 Fax: +86 752 6383952 Website:
E-mail: [email protected]
www.takstar.com
