Takstar E300, User Manual, Page: 12 / 16

Operation
1. Put the head-worn microphone on your head and adjust the pickup angle
of the microphone.
2. Insert the 3.5mm microphone plug into the MIC input interface.
3. When the power is turned on, the LED display is on. Adjust the volume knob
to a proper position.
4. If the battery icon flashes during use, it indicates that the battery is running
low and needs to be charged in time.
E300
PORTABLE AMPLIFIER
⑨ “ ” TF card slot: Insert a TF memory card according to the indicated
direction. When inserting the card, if you hear the sound “ da ” , it means it
has been installed in place. When taking out the card, press it down until you
hear the sound “ da ” , and the TF memory card will pop up automatically.
Note: Please make sure that the audio files stored in the TF card are in MP3,
WAV format, otherwise the audio files cannot be read normally, and there
may even be damage to the machine. Please format the TF card in FAT\FAT32
format before copying the songs. Another formatting (such as exFAT, NTFS
format) will cause the recordings unable to save or the stored songs unable
to play.
⑩ Charging interface: Charge the amplifier via the Micro USB charging cable.
⑪ FM antenna: It is used to strengthen the FM radio signal. It is recommended
to pull it out in the radio mode in order to get a better radio effect.
⑫ Shoulder strap buckle: It is used to install the shoulder strap, and the amplifier
can be hung diagonally on the shoulder for use.
⑬ Waist strap clip: It is used to buckle the amplifier on the belt or the waistband
for use.
11