Takstar E300, User Manual, Page: 11 / 16

E300
PORTABLE AMPLIFIER
mode, and there will be corresponding voice prompts. When connecting with
the AUX audio source or inserting the TF card, the audio input mode or the TF
card mode is prioritized. When disconnecting with the AUX audio source or
taking out the TF card, it goes to the next working mode. When inserting the
TF card and connecting to a microphone, if you keep pressing the button, the
“ REC ” icon will occur and the amplifier goes into the recording mode with
the voice prompt of “ Recording Mode ” . “ 00 ：00” on the display changes
during recording and shows the recording time. When the recording is done,
keep pressing the button to exit and save the recording.
④ “ ”Play/Pause button: In the Bluetooth, TF card or radio mode, press
the button to play and pause. When in the Bluetooth mode, keep pressing the
button to disconnect the Bluetooth. When playing music in the TF card mode,
keep pressing the button to repeat the current song with the“ ”icon
displayed; keep pressing the button again to stop repeating the song with the
“ ”icon disappearing. When in the radio mode, keep pressing the button
to search for stations, meanwhile the frequency number changes. After searching
for a station, it plays the first channel. The amplifier can save more than 50
channels. The number of channels that can be saved depends on the signal
strength of the surrounding radio stations.
⑤ “ ”Previous song button: In the Bluetooth or TF card mode, press the
button for the previous song; in the radio mode, press the button for the
previous channel.
⑥ “ ”Next song button: In the Bluetooth or TF card mode, press the button
for the next song; in the radio mode, press the button for the next channel.
⑦ “ ”MIC input interface: Put the microphone plug into the interface for
voice reinforcement.
⑧ “ ”AUX input interface: Connect to equipment like cell phones, tablets,
MP3 via the Ø3.5mm audio cable to turn the amplifier into an active speaker.
10