Takstar CM-63, User Manual

Page: 9 / 12

1. When connecting the microphone with cable, match the XLR connector
with the 3 pin on microphone, then insert fully till the XLR lock button
fixes the position.
2. When disconnecting the microphone with the cable, press the XLR lock
button, then take out the cable.
3. Connect the other end of the cable with the equipments, e.g. mixer,
power amplifier, sound card.
4. Reduce the equipment volume before operation, then adjust the volume
to a proper level to avoid speaker damage by the sound pressure surge.
5. Do not hold the microphone grille. Keep the microphone away from the
speaker as much as possible and avoid the capsule pointing to the
speaker to prevent from feedback.
CM-63
DIAPHRAGM MICROPHONE
8
Installation
mixer
microphone cable
XLR
microphone
button